The RX-ONE’s can be used on stands, a sturdy shelf or mounted directly on the wall via the RX-ONE wall bracket (sold separately). Imaging and bass response can be tuned by adjusting the distance of the speaker from the rear and side walls. As with all loudspeakers, this will depend on the size of room, flooring and furnishings therefore some simple experiments trying different distances will help optimise the performance to your surroundings.
System : 2 Way
Cabinet Construction : 18mm MDF Real wood veneer
Cabinet Design : Bass reflex
Dimensions (cm) : H x W x D 34.4 x 17.3 x 26
Weight (each) : 5.8Kg
Reflex Port : Rear Port
Impedance : Nominal 6 ohms
Sensitivity : 89dB
Power Handling: 80w per channel*
High Frequency unit : Rega ZRR
Mid /bass driver : (Doped cone) DX-125
*Power handling figures are quoted as a guide.
Amplification between 30w and 500w can be safely used depending on the quality of amplification.
To ensure adequate clearance and prevent damage to the front facia, the grille magnets must locate directly onto the drive unit fixing bolts.