Rega Spacer Update

Mind the Gap

Consult your local Rega Specialist to learn more about Rega.

Note: On Rega turntables spacers should not be necessary unless you are you using an exceptionally deep bodied cartridge from another manufacturer.

Arm height or V.T.A adjustment can be a controversial subject. Rega believes that the integrity of the arm fixing onto the arm mounting board is much more important than the questionable facility of arm adjustment. The arm should be reasonably parallel to the record surface or slightly lower at the mounting. The only time a spacer is necessary to raise the arm height is if the rear of a cartridge is hitting the record whilst playing.

 

One made from Stainless Steel

808spacer-500x500 (1).png

Stainless Steel Spacer

$39 Ea.

2mm high

His budget brother the Aluminium Spacer

Laser cut from 2mm aluminium and anodised black. Fits all Rega three point tonearms including the 2016 range of Planar turntables.

new-metal-3-point-spacer (1).jpg

aluminium Spacer

 

$29 Ea.

2mm high

 

 

The Older multi height spacer is now discontinued so pick them up for the RP6,RP3 if you haven't treated yourself to one.

rega-adjspacer_1.jpg

Goodbye Old Friend

The 3 point plastic spacer is no longer made.

rb300-2mm-spacer (1).jpg

Legacy Arms

The 2mm stainless shim for older Rega tonearms RB250 / RB300  that mount using a nut on the underside, can still be obtained @ $15 Ea.

Sleeved Nut ($20 Ea.)are also available for owners who need more than 4mm of VTA rise on an legacy arm.